VCL-WIKI
QoS Configuration

VCL-WIKI > Routers > Quality of Service > QoS Configuration

QoS Configuration Example

PIM Configuration

Note: The I.P addresses configured between the routers are in the format of 192.168.x.x/24 for routers.

In this setup, two routers have been configured with traffic policies such that Bandwidth reservation can be done. At Router R1, QoS policy for Bandwidth reservation has been configured for 100Mbps and rest 900Mbps has been left for general usage by the link.

Two Ethernet testers ET1 and ET2 have been configured at router R1 and R2 respectively.

At the Ethernet Testers, IP address 10.10.10.1 and 10.10.10.2 is configured with bandwidth of 1000Mbps.

When the traffic is sent from ET1 to ET2, at ET1, 1000Mbps traffic is generated but due to QoS policy at R1, ET2 tester receives only 100Mbps.

The above mentioned features are offered and supported by VCL-MX-50xx family of IP/MPLS Routers.


Valiant Communications is an ISO 9001:2015, ISO 10001:2018, ISO 14001:2015, ISO 27001:2013 and ISO 45001:2018 certified equipment manufacturer.